MySQL/MariaDB/Percona数据库升级脚本截取《OneinStack》中upgrade_db.sh,一般情况下不建议升级数据库版本,该脚本专提供给各位版本控们。为防止大版本之间兼容问题,脚本默认仅支持同一大版本之间的升级,如:MySQL-5.6.25升级到MySQL-5.6.26、MySQL-5.5.44升级到MySQL-5.5.45、MariaDB-10.0.20升级到MariaDB-10.0.21;不能跨分支版本且不能跨大版本,如从MySQL-5.5.44升级到PerconaL-5.5.44-37.3、MySQL-5.5.44升级到MySQL-5.6.25。
2015-07-16之前版本如何支持数据库版本升级?
《OneinStack》:
- cd /root/
- cp oneinstack/options.conf ~ #备份options.conf
- rm -rf oneinstack #删除旧版
- wget http://mirrors.linuxeye.com/oneinstack-full.tar.gz #下载最新版
- tar xzf oneinstack-full.tar.gz
- /bin/mv ~/options.conf ./oneinstack #还原options.conf, 必须使用旧版options.conf文件
- cd oneinstack
- ./upgrade db #升级数据库版本,如下图:
![MySQL/MariaDB/Percona数据库升级脚本](https://www.vpsyh.net/wp-content/uploads/2022/09/638000425396617981.png)
《lnmp一键安装包》:
- cp lnmp/options.conf ~ #备份options.conf
- rm -rf lnmp #删除旧版
- wget http://mirrors.linuxeye.com/lnmp-full.tar.gz #下载最新版
- tar xzf lnmp-full.tar.gz
- /bin/mv ~/options.conf ./lnmp #还原options.conf, 必须使用旧版options.conf文件
- cd lnmp
- ./upgrade db #升级数据库版本
PS:MySQL/MariaDB/Percona数据库升级脚本内容如下(cat upgrade_db.sh):
- #!/bin/bash
- # Author: yeho <lj2007331 AT gmail.com>
- # BLOG: https://linuxeye.com
- #
- # Notes: OneinStack for CentOS/RadHat 5+ Debian 6+ and Ubuntu 12+
- #
- # Project home page:
- # http://oneinstack.com
- # https://github.com/lj2007331/oneinstack
- Upgrade_DB()
- {
- cd $oneinstack_dir/src
- [ ! -e “$db_install_dir/bin/mysql” ] && echo “${CWARNING}The MySQL/MariaDB/Percona is not installed on your system! ${CEND}” && exit 1
- OLD_DB_version_tmp=`$db_install_dir/bin/mysql -V | awk ‘{print $5}’ | awk -F, ‘{print $1}’`
- DB_tmp=`echo $OLD_DB_version_tmp | awk -F’-‘ ‘{print $2}’`
- if [ “$DB_tmp” == ‘MariaDB’ ];then
- [ “$IPADDR_STATE”x == “CN”x ] && DOWN_ADDR=http://mirrors.aliyun.com/mariadb || DOWN_ADDR=https://downloads.mariadb.org/f
- LIBC_VERSION=`getconf -a | grep GNU_LIBC_VERSION | awk ‘{print $NF}’`
- LIBC_YN=`echo “$LIBC_VERSION < 2.14” | bc`
- [ $LIBC_YN == ‘1’ ] && GLIBC_FLAG=linux || GLIBC_FLAG=linux-glibc_214
- DB=MariaDB
- OLD_DB_version=`echo $OLD_DB_version_tmp | awk -F’-‘ ‘{print $1}’`
- elif [ -n “$DB_tmp” -a “$DB_tmp” != ‘MariaDB’ ];then
- DB=Percona
- OLD_DB_version=$OLD_DB_version_tmp
- else
- DB=MySQL
- OLD_DB_version=$OLD_DB_version_tmp
- fi
- #backup
- while :
- do
- $db_install_dir/bin/mysql -uroot -p${dbrootpwd} -e “quit” >/dev/null 2>&1
- if [ $? -eq 0 ];then
- break
- else
- echo
- read -p “Please input the root password of database: ” NEW_dbrootpwd
- $db_install_dir/bin/mysql -uroot -p${NEW_dbrootpwd} -e “quit” >/dev/null 2>&1
- if [ $? -eq 0 ];then
- dbrootpwd=$NEW_dbrootpwd
- sed -i “s+^dbrootpwd.*+dbrootpwd=’$dbrootpwd’+” ../options.conf
- break
- else
- echo “${CFAILURE}$DB root password incorrect,Please enter again! ${CEND}”
- fi
- fi
- done
- echo
- echo “${CSUCCESS}Starting $DB backup${CEND}……”
- $db_install_dir/bin/mysqldump -uroot -p${dbrootpwd} –opt –all-databases > DB_all_backup_$(date +”%Y%m%d”).sql
- [ -f “DB_all_backup_$(date +”%Y%m%d”).sql” ] && echo “$DB backup success, Backup file: ${MSG}`pwd`/DB_all_backup_$(date +”%Y%m%d”).sql${CEND}”
- #upgrade
- echo
- echo “Current $DB Version: ${CMSG}$OLD_DB_version${CEND}”
- [ -e /usr/local/lib/libtcmalloc.so ] && { je_tc_malloc=2; EXE_LINKER=”-DCMAKE_EXE_LINKER_FLAGS=’-ltcmalloc'”; }
- [ -e /usr/local/lib/libjemalloc.so ] && { je_tc_malloc=1; EXE_LINKER=”-DCMAKE_EXE_LINKER_FLAGS=’-ljemalloc'”; }
- while :
- do
- echo
- read -p “Please input upgrade $DB Version(example: $OLD_DB_version): ” NEW_DB_version
- if [ `echo $NEW_DB_version | awk -F. ‘{print $1″.”$2}’` == `echo $OLD_DB_version | awk -F. ‘{print $1″.”$2}’` ]; then
- if [ “$DB” == ‘MariaDB’ ];then
- DB_name=mariadb-${NEW_DB_version}-${GLIBC_FLAG}-${SYS_BIT_b}
- DB_URL=$DOWN_ADDR/mariadb-${NEW_DB_version}/bintar-${GLIBC_FLAG}-$SYS_BIT_a/$DB_name.tar.gz
- elif [ “$DB” == ‘Percona’ ];then
- DB_name=percona-server-$NEW_DB_version
- DB_URL=http://www.percona.com/redir/downloads/Percona-Server-`echo $NEW_DB_version | awk -F. ‘{print $1″.”$2}’`/LATEST/source/tarball/$DB_name.tar.gz
- elif [ “$DB” == ‘MySQL’ ];then
- DB_name=mysql-$NEW_DB_version
- DB_URL=http://cdn.mysql.com/Downloads/MySQL-`echo $NEW_DB_version | awk -F. ‘{print $1″.”$2}’`/$DB_name.tar.gz
- fi
- [ ! -e “$DB_name.tar.gz” ] && wget –no-check-certificate -c $DB_URL > /dev/null 2>&1
- if [ -e “$DB_name.tar.gz” ];then
- echo “Download [${CMSG}$DB_name.tar.gz${CEND}] successfully! ”
- else
- echo “${CWARNING}$DB version does not exist! ${CEND}”
- fi
- break
- else
- echo “${CWARNING}input error! ${CEND}Please only input ‘${CMSG}${OLD_DB_version%.*}.xx${CEND}'”
- fi
- done
- if [ -e “$DB_name.tar.gz” ];then
- echo “[${CMSG}$DB_name.tar.gz${CEND}] found”
- echo “Press Ctrl+c to cancel or Press any key to continue…”
- char=`get_char`
- if [ “$DB” == ‘MariaDB’ ];then
- service mysqld stop
- mv ${mariadb_install_dir}{,_old_`date +”%Y%m%d”`}
- mv ${mariadb_data_dir}{,_old_`date +”%Y%m%d”`}
- mkdir -p $mariadb_data_dir;chown mysql.mysql -R $mariadb_data_dir
- tar xzf $DB_name.tar.gz
- [ ! -d “$mariadb_install_dir” ] && mkdir -p $mariadb_install_dir
- mv mariadb-${NEW_DB_version}-*-${SYS_BIT_b}/* $mariadb_install_dir
- if [ “$je_tc_malloc” == ‘1’ -a “`echo $OLD_DB_version_tmp | awk -F’.’ ‘{print $1″.”$2}’`” != ‘10.1’ ];then
- sed -i ‘s@executing mysqld_safe@executing mysqld_safe\nexport LD_PRELOAD=/usr/local/lib/libjemalloc.so@’ $mariadb_install_dir/bin/mysqld_safe
- elif [ “$je_tc_malloc” == ‘2’ -a “`echo $OLD_DB_version_tmp | awk -F’.’ ‘{print $1″.”$2}’`” != ‘10.1’ ];then
- sed -i ‘s@executing mysqld_safe@executing mysqld_safe\nexport LD_PRELOAD=/usr/local/lib/libtcmalloc.so@’ $mariadb_install_dir/bin/mysqld_safe
- fi
- $mariadb_install_dir/scripts/mysql_install_db —user=mysql –basedir=$mariadb_install_dir –datadir=$mariadb_data_dir
- chown mysql.mysql -R $mariadb_data_dir
- service mysqld start
- $mariadb_install_dir/bin/mysql < DB_all_backup_$(date +”%Y%m%d”).sql
- service mysqld restart
- $mariadb_install_dir/bin/mysql -uroot -p${dbrootpwd} -e “drop database test;” >/dev/null 2>&1
- $mariadb_install_dir/bin/mysql -uroot -p${dbrootpwd} -e “reset master;” >/dev/null 2>&1
- [ $? -eq 0 ] && echo “You have ${CMSG}successfully${CEND} upgrade from ${CMSG}$OLD_DB_version${CEND} to ${CMSG}$NEW_DB_version${CEND}”
- elif [ “$DB” == ‘Percona’ ];then
- tar zxf $DB_name.tar.gz
- cd $DB_name
- make clean
- if [ “`echo $NEW_DB_version | awk -F. ‘{print $1″.”$2}’`” == ‘5.5’ ];then
- cmake . -DCMAKE_INSTALL_PREFIX=$percona_install_dir \
- -DMYSQL_DATADIR=$percona_data_dir \
- -DSYSCONFDIR=/etc \
- -DWITH_INNOBASE_STORAGE_ENGINE=1 \
- -DWITH_PARTITION_STORAGE_ENGINE=1 \
- -DWITH_FEDERATED_STORAGE_ENGINE=1 \
- -DWITH_BLACKHOLE_STORAGE_ENGINE=1 \
- -DWITH_MYISAM_STORAGE_ENGINE=1 \
- -DWITH_ARCHIVE_STORAGE_ENGINE=1 \
- -DWITH_READLINE=1 \
- -DENABLE_DTRACE=0 \
- -DENABLED_LOCAL_INFILE=1 \
- -DDEFAULT_CHARSET=utf8mb4 \
- -DDEFAULT_COLLATION=utf8mb4_general_ci \
- $EXE_LINKER
- else
- cmake . -DCMAKE_INSTALL_PREFIX=$percona_install_dir \
- -DMYSQL_DATADIR=$percona_data_dir \
- -DSYSCONFDIR=/etc \
- -DWITH_INNOBASE_STORAGE_ENGINE=1 \
- -DWITH_PARTITION_STORAGE_ENGINE=1 \
- -DWITH_FEDERATED_STORAGE_ENGINE=1 \
- -DWITH_BLACKHOLE_STORAGE_ENGINE=1 \
- -DWITH_MYISAM_STORAGE_ENGINE=1 \
- -DWITH_ARCHIVE_STORAGE_ENGINE=1 \
- -DENABLED_LOCAL_INFILE=1 \
- -DENABLE_DTRACE=0 \
- -DDEFAULT_CHARSET=utf8mb4 \
- -DDEFAULT_COLLATION=utf8mb4_general_ci \
- $EXE_LINKER
- fi
- make -j `grep processor /proc/cpuinfo | wc -l`
- service mysqld stop
- mv ${percona_install_dir}{,_old_`date +”%Y%m%d”`}
- mv ${percona_data_dir}{,_old_`date +”%Y%m%d”`}
- [ ! -d “$percona_install_dir” ] && mkdir -p $percona_install_dir
- mkdir -p $percona_data_dir;chown mysql.mysql -R $percona_data_dir
- make install
- cd ..
- $percona_install_dir/scripts/mysql_install_db —user=mysql –basedir=$percona_install_dir –datadir=$percona_data_dir
- chown mysql.mysql -R $percona_data_dir
- service mysqld start
- $percona_install_dir/bin/mysql < DB_all_backup_$(date +”%Y%m%d”).sql
- service mysqld restart
- $percona_install_dir/bin/mysql -uroot -p${dbrootpwd} -e “drop database test;” >/dev/null 2>&1
- $percona_install_dir/bin/mysql -uroot -p${dbrootpwd} -e “reset master;” >/dev/null 2>&1
- [ $? -eq 0 ] && echo “You have ${CMSG}successfully${CEND} upgrade from ${CMSG}$OLD_DB_version${CEND} to ${CMSG}$NEW_DB_version${CEND}”
- elif [ “$DB” == ‘MySQL’ ];then
- tar zxf $DB_name.tar.gz
- cd $DB_name
- make clean
- if [ “`echo $NEW_DB_version | awk -F. ‘{print $1″.”$2}’`” == ‘5.5’ ];then
- cmake . -DCMAKE_INSTALL_PREFIX=$mysql_install_dir \
- -DMYSQL_DATADIR=$mysql_data_dir \
- -DSYSCONFDIR=/etc \
- -DWITH_INNOBASE_STORAGE_ENGINE=1 \
- -DWITH_PARTITION_STORAGE_ENGINE=1 \
- -DWITH_FEDERATED_STORAGE_ENGINE=1 \
- -DWITH_BLACKHOLE_STORAGE_ENGINE=1 \
- -DWITH_MYISAM_STORAGE_ENGINE=1 \
- -DWITH_ARCHIVE_STORAGE_ENGINE=1 \
- -DWITH_READLINE=1 \
- -DENABLED_LOCAL_INFILE=1 \
- -DENABLE_DTRACE=0 \
- -DDEFAULT_CHARSET=utf8mb4 \
- -DDEFAULT_COLLATION=utf8mb4_general_ci \
- -DWITH_EMBEDDED_SERVER=1 \
- $EXE_LINKER
- else
- cmake . -DCMAKE_INSTALL_PREFIX=$mysql_install_dir \
- -DMYSQL_DATADIR=$mysql_data_dir \
- -DSYSCONFDIR=/etc \
- -DWITH_INNOBASE_STORAGE_ENGINE=1 \
- -DWITH_PARTITION_STORAGE_ENGINE=1 \
- -DWITH_FEDERATED_STORAGE_ENGINE=1 \
- -DWITH_BLACKHOLE_STORAGE_ENGINE=1 \
- -DWITH_MYISAM_STORAGE_ENGINE=1 \
- -DENABLED_LOCAL_INFILE=1 \
- -DENABLE_DTRACE=0 \
- -DDEFAULT_CHARSET=utf8mb4 \
- -DDEFAULT_COLLATION=utf8mb4_general_ci \
- -DWITH_EMBEDDED_SERVER=1 \
- $EXE_LINKER
- fi
- make -j `grep processor /proc/cpuinfo | wc -l`
- service mysqld stop
- mv ${mysql_install_dir}{,_old_`date +”%Y%m%d”`}
- mv ${mysql_data_dir}{,_old_`date +”%Y%m%d”`}
- [ ! -d “$mysql_install_dir” ] && mkdir -p $mysql_install_dir
- mkdir -p $mysql_data_dir;chown mysql.mysql -R $mysql_data_dir
- make install
- cd ..
- $mysql_install_dir/scripts/mysql_install_db —user=mysql –basedir=$mysql_install_dir –datadir=$mysql_data_dir
- chown mysql.mysql -R $mysql_data_dir
- service mysqld start
- $mysql_install_dir/bin/mysql < DB_all_backup_$(date +”%Y%m%d”).sql
- service mysqld restart
- $mysql_install_dir/bin/mysql -uroot -p${dbrootpwd} -e “drop database test;” >/dev/null 2>&1
- $mysql_install_dir/bin/mysql -uroot -p${dbrootpwd} -e “reset master;” >/dev/null 2>&1
- [ $? -eq 0 ] && echo “You have ${CMSG}successfully${CEND} upgrade from ${CMSG}$OLD_DB_version${CEND} to ${CMSG}$NEW_DB_version${CEND}”
- fi
- fi
- }
Thu Jul 16 12:34:49 CST 2015